Column-type grain dryer СЗК-10
Designed for pre-cleaning, drying and primary purification of grain, tailings, leguminous plants and rape, with the source humidity up to 35%.
Fresh wheat grain productivity by humidity decrease from 20 to 14% is 10 ton per hour.
Designed for pre-cleaning, drying and primary purification of the grain, tailings, leguminous plants and rape, with the source humidity up to 35%.
When low humidity grain, the process of drying can be can be carried out through a ventilation with an atmospheric air without heating it in the heat unit. The dryer can work in two cycles: a continuous, when at the same time with dumping the dried and cooled grain the wet one is filled; and a proportioning, when the dryer is filled with the grain, equal to its capacity. Then the dried grain passes through the dryer as many times as necessary until the conditional humidity (cycle “dryer-to-dryer"). Then dried grain is cooled, unloaded and a new portion is loaded into the drying complex.
|Productivity for raw wheat grain at reducing humidity from 20% to 14%, ton per hour||11|
|Rated heat power, kW||800|
|Fuel type||Liquid fuel||Solid fuel|
|Specific fuel consumption at reducing humidity from 20% to 14%, kg per ton||5.5||30|
|Specific electric energy consumption at reducing humidity from 20% to 14%, kW*h/t||4.5|
|Type of energy consumed||Heat and electrical|
|Heat consumption per 1 kg of vaporized moistness, kJ/kg||4300|
|Electric drive control||Remote|
|Electric circuit voltage, V||220/380|
|Overall dimensions, mm:|
|Complex and included equipment total weight, kg||8 000||14 100|
|Irregularity of drying, %||±2|
|Irregularity of grain heating, °С||±2|
|Heat carrier temperature deviation, °С||±3|
|Shattering of grain, %||±0.9|
|Reliability index of technological process, no less||0.94|
|Grain germinability and germinating force reduction||Prevented|
|Life cycle before overhaul, hours||350|
|Specific total operating labour-intensiveness of maintenance services, persons-hour/hour||0.12|
|Shift activity time (per month) for maintenance service, hours||0.9|
|Active time readiness coefficient, hours||0.94|
|Life cycle years, not less||8|