Grain cleaning and drying complex ЗСК-60ША
Designed for after-harvesting processing (preliminary cleaning, drying and primary purification) of the grain, tailings, leguminous, groats and rape plants with the initial humidity up to 40%.
The complex mechanization of the processes of drying, cleaning and handling.
Series overview
The integrated complex is developed for an after-harvesting processing (cleaning and drying) of the grain, tailings, leguminous, groats and rape plants with the initial humidity up to 40%. It is also provided the mechanization of the processes of drying, cleaning and handling.
When low humidity grain, the process of drying can be can be carried out through a ventilation with an atmospheric air without heating in order to vaporized moistness.
The dryer can work in two cycles:
- a continuous, when at the same time with dumping the dried and cooled grain the wet one is filled;
- a proportioning, when the dryer is filled with the grain, equal to its capacity. Then the dried grain passes through the dryer as many times as necessary until the conditional humidity. Then dried grain is cooled, unloaded and a new portion is loaded into the drying complex.
Moreover, when it is necessary, there is an option to load only one or two hoppers. In such a case the productivity is two times (1.5) less.
The integrated complexes can be attached to the mechanized granaries.
GENERAL SPECIFICATIONS:
|
Model |
ZSK-60ShZh(ШЖ) |
ZSK-60ShG(ШГ) |
|
|
Type |
Stationary |
||
|
Productivity for raw wheat grain at reducing humidity from 20% to 14%, ton per hour |
60 |
||
|
Rated heat power, kW |
6400 |
||
|
Heat fans quantity, pcs |
2 |
||
|
Type of energy consumed |
Heat and electrical |
||
|
Fuel type |
Diesel STB 1658-2006 or domestic stove TU 38.101.656-87 |
Natural gas State Standard 5542-87 |
|
|
Specific fuel consumption at reducing humidity from 20% to 14%, kg per ton |
7.5 |
8 m3 /t |
|
|
Heat consumption per 1 kg of vaporized moistness, kJ/kg |
4200 |
||
|
Electric drive control |
Remote |
||
|
Electric circuit voltage, V |
220/380 |
||
|
Electric motors power, kW |
440 |
||
|
Maintenance staff, persons |
2 |
||
|
Overall dimensions, mm: Height (over noria apex) Length Width |
24 000 50 000 22 000 |
||
|
Irregularity of drying, % |
±1 |
||
|
Irregularity of grain heating, °С |
±5 |
||
|
Heat carrier temperature deviation, °С |
±3 |
||
|
Shattering of grain, % |
0.25 |
||
|
Grain germinability and germinating force reduction |
Prevented |
||
|
Life cycle before overhaul, hours |
350 |
||
|
Specific total operating labour-intensiveness of maintenance services, persons-hour/hour |
0.12 |
||
|
Shift activity time (per month) for maintenance service, hours |
0.4 |
||
|
Active time readiness coefficient, hours |
0.96 |
||
|
Life cycle years, not less |
15 |
||