Wheel loaders


Payload capacity, kg | 2000 |
The grip width, mm | 600..1240 |
Load height,mm | 3450 |
Reach (at the back of the feet),mm | 1000 |
Weight, kg | 1500 |

Width, mm | 3680 |
Width of the cleaning surface at the end position,mm | 2730 |
Turn angle,deg | ±35 |
Weight, kg | 1500 |












Bucket capacity, m3 | 2.0 |
Specific gravity of loading material, tm3 | 1.8 |
Width, mm | 2550 |
Dump height,mm | 4400 |
Bucket reach-out,mm | 1600 |
Weight, kg | 1370 |

Bucket capacity, m3 | 4.0 |
Specific gravity of loading material, tm3 | 0.7 |
Width, mm | 2450 |
Dump height,mm | 4350 |
Bucket reach-out,mm | 1750 |
Weight, kg | 1850 |

V=2,9 m3 , without teeth.
Capacity | 2,9 m3 |
Width | 2800 mm |
Opening height | 1560 mm |
Weight | 1630 kg |

Capacity, t |
5 |
Width, mm |
1460 |
Max dump height, mm |
3940 |
Engagement diameter, mm |
200...1300 |
Weight, kg |
1540 |


Capacity in А/В/С positions, t |
1,2/1,5/2 |
Max dump height, mm |
5450/5000/4550 |
Max dump reach, mm |
4800/3750/2700 |
Weight, kg |
450 |

Width,mm | 2620 |
Penetration,mm | 150 |
Weight, kg | 820 |

ayload capacity in positions A/B/C, t | 1.2/1.5/2.0 |
Maximum lift height (at hook),m | 5.37/4.84/4.28 |
Maximum reach (at hook),m | 4.60/3.55/2.50 |
Weight, kg | 450 |


ucket capacity, m3 | 0.92 |
Specific gravity of loading material, tm3 |
- |
Width, mm | 2500 |
Dump height,mm | 2740 |
Bucket reach-out,mm | 1150 |
Weight, kg | 860 |

Payload capacity, kg | 5000 |
The grip width, mm | 2420 |
Maximum dump height,mm | 3850 |
The grip diameter,mm | 600..1100 |
Weight, kg | 1350 |

Payload capacity, kg | 5000 |
The grip width, mm | 1460 |
Maximum dump height,mm | 3940 |
The grip diameter,mm | 200..1300 |
Weight, kg | 1540 |

Payload capacity, kg | 1000 |
Maximum dump height,mm | 3700 |
Opening width grip,mm | 2900 |
Minimum diameter rolls captured,mm | 950 |
Width, mm | 210 |
Operating pressure in hydraulic system,MPa | 20-1 |
Weight, kg | 410 |

Wopened |
2000 mm |
Dmin roll |
1000 |
Capacity |
800 kg |
Weight |
400 kg |



Payload capacity, kg | 3400 |
The (supportive) feet width, mm | 310..1190 |
Load height,mm | 3350 |
Reach (at the back of the feet),mm | 730 |
Weight, kg | 600 |


Capacity | 2,5 m3 |
Width | 2000 mm |
Opening height | 1300 mm |
Weight | 1550 kg |


Width, mm | 3250 |
Maximum width of the cleaning surface,mm | 2660 |
Turn angle,deg | ±35 |
Weight, kg | 1100 |


Capacity (pulled out, pulled in telescope), t |
1,15/1,35 |
Max lift (pulled out, pulled in telescope), mm |
6750/5950 |
Max dump reach (pulled out, pulled in telescope), mm |
2250/1750 |
Telescope motion, mm |
900 |
Boom turn angle, deg |
±24 |
Weight, kg |
710 |







Load capacity, t |
2 |
Width , mm |
270-990 |
Forks step, mm |
40 |
Dump height, mm |
2900 |
Forks outreach, mm |
450 |
Min turn radius in transport position, mm |
4500 |
Length in transport position, mm |
6630 |
Weight, kg |
300 |

Load capacity, m³ |
1.1 |
Loaded material weight, t/m³ |
1.82 |
Width, mm |
2100 |
Dump height (angle 45°), mm |
2600 |
Dump reach (load angle 45°), mm |
880 |
Min turn radius in transport position, mm |
4800 |
Length in transport position, mm |
6000 |
Weight, kg |
350 |

Load capacity, kg: |
2 |
Max hook lift while max boom lift, mm |
3420 |
Max hook lift while horizontal boom position, mm |
1650 |
Hook outreach while max boom lift, mm |
900 |
Hook outreach while horizontal boom position, mm |
1750 |
Min turn radius in transport position, mm |
4300 |
Length in transport position, mm |
5790 |
Weight, kg |
125 |

Load capacity, t |
1.3 |
Width, mm |
2150 |
Dump height, mm |
2450 |
Finger outreach, mm |
980 |
Min turn radius in transport position, mm |
4800 |
Length in transport position, mm |
6200 |
Weight, kg |
600 |

Min turn radius in transport position, mm |
4800 |
Width (forward/ pointed ±30°), mm |
2500/2170 |
Dump height, mm |
750 |
Turn angle, deg |
±30 |
Length in transport position (pointed blade ±30°), mm |
5920 |
Weight, kg |
540 |

Load capacity, t |
1.2 |
Roll diameter, mm |
850 - 1750 |
Width, mm |
1360 |
Dump height, mm |
3250 |
Forks outreach at max height, mm |
1800 |
Min turn radius in transport position, mm |
4500 |
Length in transport position, mm |
6810 |
Weight, kg |
340 |

Load capacity, kg: Min hook outreach (А) Max hook outreach (В) |
1260 930 |
Max hook lift in А/В position, mm |
3900/4000 |
Max hook lift while horizontal boom position, mm |
1800 |
Hook outreach in А/В position, mm: horizontal boom position max boom lift |
1100/2100 2150/3100 |
Min turn radius in transport position, mm |
4700 |
Length in transport position, mm |
7600 |
Weight, kg |
400 |

Blade angling system |
Hydraulic |
Blade wings angle, deg |
±30 |
Min turn radius in transport position, mm |
5000 |
Clean line width (forward/ pointed ±30°), mm |
2720/2360 |
Dump height, mm |
835 |
Length in transport position (pointed blade ±30°), mm |
6060 |
Weight, kg |
720 |

Load capacity, m³ |
0.85 |
Loaded material weight, t/m³ |
2.35 |
Width, mm |
2170 |
Dump height (angle 43°), mm |
2690 |
Dump reach (angle 43°), mm |
860 |
Min turn radius in transport position, mm |
4900 |
Length in transport position, мм |
5970 |
Weight, kg |
480 |

Clean line width, mm |
2530 |
Dump height, mm |
835 |
Blade width in transport position , mm |
2460 |
Min turn radius in transport position, mm |
5200 |
Length in transport position, mm |
6070 |
Weight, kg |
640 |

Load capacity, m³ |
1.9 |
Loaded material weight, t/m³ |
0.71 |
Width, mm |
2300 |
Dump height (angle 25°), mm |
2750 |
Dump height (angle 45°), mm |
2350 |
Dump reach (angle 45°), mm |
1250 |
Min turn radius in transport position, mm |
4900 |
Length in transport position, mm |
6250 |
Weight, kg |
425 |


Load capacity, t |
1.5 |
Width, mm |
2090 |
Finger outreach at max height and unloading angle 45°, mm |
980 |
Min turn radius in transport position, mm |
4800 |
Length in transport position, mm |
6200 |
Weight, kg |
560 |

Clean line width, mm: Broom in straight position Broom in turned position 30° |
2500 2215 |
Broom diameter, mm |
700 |
Min turn radius in transport position, mm |
5400 |
Length in transport position (broom in straight position), mm |
6920 |
Weight, kg |
500 |

Clean line width (with side broom), mm |
2400 |
Main broom diameter, mm |
600 |
Min turn radius in transport position, mm |
5600 |
Length in transport position, mm |
7590 |
Weight, kg |
715 |


Width, mm |
3250 |
Clean line width, mm |
2660 |
Turn angle, deg |
±35 |
Weight, kg |
1100 |

Capacity, kg |
800 |
Overall dimensions, mm: length width height |
4200 2360 2660 |
Pressure in hydraulic system, MPa |
20-1 |
Weight, kg |
1600 |


Capacity, m3 |
3.2 |
Width, mm |
2700 |
Dump height, mm |
2400 |
Weight, kg |
950 |

Load capacity, m³ |
1,7 |
Loaded material weight, t/m³ |
1,8 |
Width, mm |
2500 |
Dump height (closed/open jaw), mm |
2400/3680 |
Dump reach (closed/open jaw), mm |
900/830 |
Weight, kg |
1250 |



Capacity (pulled out, pulled in telescope), t |
1,15/1,35 |
Max lift (pulled out, pulled in telescope), mm |
6500/5700 |
Max dump reach (pulled out, pulled in telescope), mm |
2000/1500 |
Telescope motion, mm |
900 |
Boom turn angle, deg |
± 24 |
Weight, kg |
710 |

Payload capacity, kg | 3400 |
The (supportive) feet width, mm | 310..1190 |
Load height,mm | 3350 |
Reach (at the back of the feet),mm | 730 |
Weight, kg | 600 |

Capacity, t |
1.0 |
Max dump height, m |
3.7 |
Opening width, mm |
2900 |
Min roll diameter, mm |
950 |
Width, mm |
210 |
Pressure in hydraulic system, MPa |
20-1 |
Weight, kg |
410 |


Capacity, t |
3 |
Coverage, mm |
1380 |
Dump height, mm |
2470 |
Weight, mm |
252 |


Bucket capacity, m3 | 0.92 |
---|---|
Specific gravity of loading material, tm3 | — |
Width, mm | 2500 |
Dump height,mm | 2740 |
Bucket reach-out,mm | 1150 |
Weight, kg | 860 |


Width,mm | 2612 |
Penetration,mm | 150 |
Weight, kg |
820 |

Capacity in А/В/С positions, t |
1,2/1,5/2 |
Max dump height, mm |
5370/4840/4280 |
Max dump reach, mm |
4600/3550/2500 |
Weight, kg |
450 |

Load capacity, m³ |
1.9 |
Loaded material weight, t/m³ |
1.8 |
Overall dimensions, mm: length height width |
1062 1204 2526 |
Weight, kg |
835 |



Capacity, t |
3,5 |
Width, mm |
2090 |
Max dump height, mm |
3450 |
Diameter, mm |
260...850 |
Weight, kg |
1000 |

Load capacity, m³ |
1,9 |
Loaded material weight, t/m³ |
1,8 |
Width, mm |
2500 |
Dump height, mm |
2740 |
Dump reach, mm |
1150 |
Weight, kg |
740 |

Load capacity, m³ |
2,9 |
Loaded material weight, t/m³ |
1,1 |
Width, mm |
2650 |
Dump height, mm |
2580 |
Dump reach, mm |
1330 |
Weight, kg |
950 |

Payload capacity, kg | 2000 |
The grip width, mm | 600..1240 |
Load height,mm | 3450 |
Reach (at the back of the feet),mm | 1000 |
Weight, kg | 1500 |

Width, mm |
3680 |
Clean line width while extreme position, mm |
2730 |
Turn angle, deg |
±35 |
Weight, kg |
1500 |



Capacity, t |
3 |
Capacity with closed hold-down tool, m3 |
1.8 |
Overall dimensions, mm: length width height Weight, kg |
1370 2520 1190 1750 |

Capacity, t |
3 |
Jaw diameter while closed hold-down tool, mm |
880 |
Max lift while opened jaw, mm |
1300 |
Pintels number, pc |
10 |
Step between pintels, mm |
250 |
Overall dimensions, mm: length width height Weight, kg |
1428 2400 1760 1280 |
