AMKODOR 165
Series overview
Motor graders are designed for digging-grading operations in construction and maintenance of roads. It can be used for moving, distribution of soils and road construction materials, laying-out of backfalls, caves, earth fills, boxing of ballast and side ditch, snow removing, mixing of soils with additives and binding substance on the road bed. It is also designed for loosening of asphalt surface, cobbles and heavy-textured soils with the help of extra-attachment – ripper which is installed at the back of the graider. Grading system can be installed on demand.
Wheel arrangement |
1x2x3 |
|
Engine |
Cummins QSB6.7-C173 |
|
Rated net power |
129 kW (175 hp) at 2500 RPM |
|
Frame |
Articulated |
|
Articulation angle, degree |
±27 |
|
Transmission |
Hydromechanical, Powershift |
|
Number of gears, forward/reverse |
6/3 |
|
Max travel speed, km/h |
40 |
|
Rear axle |
Тandem |
|
Differential |
No-Spin |
|
Tires |
16.9R24 |
|
Hydraulic system |
Single pump, Load-Sensing, closed center, with variable displacement pump, direct manually operated control valves and priority valve for steering |
|
Service brake system |
Rear axle multi-disk wet type brakes with hydraulic drive |
|
Base, mm |
6440 |
|
Tread, mm: front wheels rear wheels |
2086 2086 |
|
Front axle oscillation, degree |
±12 |
|
Front wheel leaning, degree |
±12 |
|
Steering angle, degree |
±31 |
|
Steering |
Front wheels and articulated frame, hydrostatic with hydraulic feedback and wheel driven emergency pump |
|
Turning radius, mm |
6100 |
|
Length, travel position, mm: standard with moulboard with mouldboard, blade and ripper |
9000 9600 |
|
Width, mm |
2550 |
|
Height, top of cab, mm |
3500 |
|
Operating weight, kg: standard, mouldboard only with mouldboard, blade and ripper
|
14300 15600
|
|
MOULDBOARD |
||
Width, mm |
3700 |
|
Height, mm |
650 |
|
Side shift, right/left, mm |
±800 |
|
BLADE RD-165C.45.64.000 (optional) |
||
Width, mm |
2500 |
|
Height, mm |
850 |
|
Cutting depth, mm |
50 |
|
SWING BLADE RD-165C.45.65.000 (optional) |
||
Width, mm |
3110 |
|
Height, mm |
850 |
|
Cutting depth, mm |
100 |
|
Turn angle, degree |
±33° |
|
RIPPER RD-165C.45.93.000 (optional) |
||
Width, mm |
1390 |
|
Ripping depth, mm |
250 |
|
Number of shanks |
5 |

Wheel arrangement |
1x2x3 |
|
Engine |
Cummins QSB6.7-C173 |
|
Rated net power |
129 kW (175 hp) at 2500 RPM |
|
Frame |
Articulated |
|
Articulation angle, degree |
±27 |
|
Transmission |
Hydromechanical, Powershift |
|
Number of gears, forward/reverse |
6/3 |
|
Max travel speed, km/h |
40 |
|
Rear axle |
Тandem |
|
Differential |
No-Spin |
|
Tires |
16.9R24 |
|
Hydraulic system |
Single pump, Load-Sensing, closed center, with variable displacement pump, direct manually operated control valves and priority valve for steering |
|
Service brake system |
Rear axle multi-disk wet type brakes with hydraulic drive |
|
Base, mm |
6440 |
|
Tread, mm: front wheels rear wheels |
2086 2086 |
|
Front axle oscillation, degree |
±12 |
|
Front wheel leaning, degree |
±12 |
|
Steering angle, degree |
±31 |
|
Steering |
Front wheels and articulated frame, hydrostatic with hydraulic feedback and wheel driven emergency pump |
|
Turning radius, mm |
6100 |
|
Length, travel position, mm: standard with moulboard with mouldboard, blade and ripper |
9000 9600 |
|
Width, mm |
2550 |
|
Height, top of cab, mm |
3500 |
|
Operating weight, kg: standard, mouldboard only with mouldboard, blade and ripper
|
14300 15600
|
|
MOULDBOARD |
||
Width, mm |
3700 |
|
Height, mm |
650 |
|
Side shift, right/left, mm |
±800 |
|
BLADE RD-165C.45.64.000 (optional) |
||
Width, mm |
2500 |
|
Height, mm |
850 |
|
Cutting depth, mm |
50 |
|
SWING BLADE RD-165C.45.65.000 (optional) |
||
Width, mm |
3110 |
|
Height, mm |
850 |
|
Cutting depth, mm |
100 |
|
Turn angle, degree |
±33° |
|
RIPPER RD-165C.45.93.000 (optional) |
||
Width, mm |
1390 |
|
Ripping depth, mm |
250 |
|
Number of shanks |
5 |