АМКODOR 2243В
Skidders AMKODOR 2243В andAMKODOR 2242В are designed for tree skidding and also for indirect work at the cutting area: loading point preparation, whip stacking, decking.
Series overview
Today logging process is divided into two main technics: cut-to-length (Scandinavian) and whiplash (Canadian). That is why JSC Amkodor – holding managing company has machines in its products range for both technics.
CTL technology is based on the usage of harvester and forwarder. Harvesters are used for tree felling, branch cutting and block cutting. Forwarders are used for gathering, substocking and delivery of grading to warehouses or wood-transport road.
In order to raise mature forest it is necessary to do regular improvement cutting (admitting light, cleaning, thinning, accretion cutting, sanitary felling). Amkodor holding manufaxtures logging machines for improvement cutting:
- harvester AMKODOR 2531 together with forwarder AMKODOR 2631;
- harvester AMKODOR 2541 together with forwarder AMKODOR 2641 or AMKODOR 2661-01.
For clear felling (final felling) are offered powerful logging machines:
- harvester AMKODOR 2551 together with forwarder AMKODOR 2661-01,AMKODOR 2662, AMKODOR 2662-01 or AMKODOR 2682-01.
Whiplash technic is based on skidder use. Amkodor holding offers the next models:
- skidder AMKODOR 2243 equipped with crane and bracket;
- skidder AMKODOR 2243B (choker) and also skidder AMKODOR 2242B (choker).
These machines perform gathering and delivery of tree-length material from cutting point to intermediate storage area or charging area.
Chip flaker AMKODOR 2904 is used for chopping of round timber, cutting and clearing waste and low-quality raw wood for the following use as a fuel.
Log loader AMKODOR 352L and wheel loader AMKODOR 371AC equipped with clamp are used for loading of round wood to vehicle, sticking , log trucks unloading and unstacking. Machines are equipped with special buckets for loading of chips and cuttings.
Technical specification |
2243В |
---|---|
Turn capacity, м3 |
10 |
Winch |
Single-drum, reverse |
Winch pulling force of bottom rope wrap, kN |
60 |
Cable capacity, m |
50 |
Chokers number |
6 |
Blade width, mm |
2 200 |
Cable line speed, m/sec |
0.64 |
Blade depth, mm |
270 |
Rear board depth, mm |
215 |
Engine |
Д-260.1 |
Engine power |
114 kW (155 hp) at 2100 rpm |
Wheel arrangement |
4х4 |
Transmission |
Hydromechanical |
Number of gears, forward/ reverse |
4/2 |
Direction of forward movement |
To the motor semi-frame |
Travel speed, forward, km/h |
|
Oscillation angle of semi-frames, degree |
±15 |
Differential gear |
With increased friction |
Service brakes |
Multi-disk oil-immersed brakes of front and rear axles with separate hydraulic drive at axles |
Parking and emergency brakes |
Single-disc brakes with hydraulic control |
Steering |
Articulated frame with hydraulic drive and hydraulic feedback |
Tires |
30.5L-32LS |
Hydraulic system |
Load-sensing, with controlled pump and distributive valve with electrohydraulic control |
Transport length, mm |
7 300 |
Width over wheels, mm |
2 880 |
Height over cab, mm |
3 700 |
Wheel track |
2 100 |
Turning radius, m |
6 700 |
Operating weight, kg |
12 500 |

Technical specification |
2242В |
|
---|---|---|
Turn capacity, м3 |
10 |
|
Winch |
Single-drum, reverse, with rifled drum, turned off with drive (for easy cable payout), and rope guideplate |
|
Winch pulling force of bottom rope wrap, kN |
55 |
|
Cable capacity, m |
50 |
|
Chokers number |
6 |
|
Blade width, mm |
2 200 |
|
Cable line speed, m/sec |
0.75 |
|
Blade depth, mm |
270 |
|
Rear board depth, mm |
500 |
|
Engine |
Д-260.1 S2 |
|
Engine power |
116 kW (158 hp) at 2100 rpm |
|
Wheel arrangement |
4х4 |
|
Transmission |
Hydromechanical |
|
Number of gears, forward/ reverse |
4/2 |
|
Direction of forward movement |
To the motor semi-frame |
|
Travel speed, forward, km/h |
|
|
Oscillation angle of semi-frames, degree |
±15 |
|
Differential gear |
Combined (with increased friction and additional hydraulic block system) |
|
Service brakes |
Multi-disk oil-immersed brakes of front and rear axles with separate hydraulic drive at axles |
|
Parking and emergency brakes |
Single-disc brakes with hydraulic control |
|
Steering |
Articulated frame with hydraulic drive and hydraulic feedback |
|
Tires |
30.5L-32LS |
|
Hydraulic system |
With uncontrolled pump and distributive valve with direct hydraulic control |
|
Transport length, mm |
7 300 |
|
Width over wheels, mm |
2 880 |
|
Height over cab, mm |
3 700 |
|
Wheel track |
2 100 |
|
Turning radius, m |
7 200 |
|
Operating weight, kg |
12 500 |